
General Overview
Modifications
Basic Set-ups
• Trolling with a Lead
• Sturgeon and Halibut
• Inline Diver
• Down Rigger Set-up
Customer Suggestions

The Berge Tackle Scent Dispenser is designed to attract fish on three
different levels – scent, sight and sound.
Not
only does the revolutionary patent pending scent chamber allow you the
versatility to use liquid, solid, or gel scents, but it works more effectively than anything on the market.
The flow-through chamber is customizable to allow you to control the rate of scent dispersal. This unique design
helps your scent products leave a stronger trail and last longer than
ever before.
The
Berge Tackle Scent Dispenser is available in multiple colors and comes with reflective
tape that you affix to your Scent Dispenser
as your fishing situation requires.
Our reflective tape adds the allure of the proven
flasher technique to an already effective scent dispenser. The
Berge Tackle Scent Dispenser comes in several colors to fit your fishing
situation or to simulate a fish's natural prey – Herring, Mackerel,
Sardines.
As the Berge Tackle Scent Dispenser moves through the water it spins. Customize the rate and fashion of the spin for your
fishing conditions (ie. slower, off-centered, egg-rolled).
The Berge Tackle Scent Dispenser attract fish
as it moves through the water creating a considerable amount of vibration
that fish "hear" even if they are far away, as well as creating the highly alluring clicking sound! This
works ideally in trolling situations.

Enlarging Chamber: Use a pointed tool to enlarge one or both chamber holes to increase scent dispersal. We suggest leaving one at the standard size for liquids and increasing the other to 1/8" round for solids.
Spin Speed: To slow spin speed – cut fins at any of the
three mark lines. This is especially useful when trolling. For those
who want to represent an injured bait fish cut one fin to create an
asymmetrical (Egg Roll) spin that will attract predator fish.
Thicker Liquids & Gels: For thicker liquids and
gels you may want to increase the flow into your Scent Dispenser by
enlarging the hole to 1/8" inside the plastic canister, this will
allow for more flow, resulting in a faster rate of scent delivery. We
also recommend, adding two 1/32" holes into the plastic canister
to increase the scent even more. Your scent will still last hours.
Solids & Tablets: When using solids or tablets
we suggest adding an additional hole in the scent chamber. Just like
with thicker liquids and gels you can enlarge the size of the lid and
chamber hole to customize your scent delivery.
Reflector Tape: Use the provided reflector tape for added visibility

Your liquid or oil scents should last approx. 30 minutes and solids last for hours.
- Tie end of main line to a triple swivel.
- Tie a 24-36" line to the other end of swivel.
- Tie a snap swivel on the end of line and snap on the Berge Tackle Scent Dispenser.
- Tie another snap swivel on opposite end of the scent dispenser and attach an 18-24" leader line.
- At the other end of your leader line attach hook, lure, herring, quick fish or our Little Stinker Scent Dispenser.
- Run a 24-36" weight line from the triple swivel down to a 6-18 ounce weight depending on the water conditions.
Note: If you get take downs without hooking up try shortening your leader line


Bottom Fish feed by scent. The Berge Tackle Big Stinker Scent Dispenser increases scent in the water.
Install the Berge Tackle Big Stinker Scent Dispenser inline above your slip weight. This allows it to
stay above the bottom and dispense a more effective herring or bait scent trail.

- Tie main line to the front of your diver.
- Attach snap swivels on each end of a 24-48" line.
- Snap one end to diver and one to Scent
Dispenser.
- Attach another snap swivel on the end of the Scent Dispenser.
- Create leader line 18 to 24 inches long and attach lure or herring. If running herring
create leader 36 inches or more. If you get "take downs"
and no "hook ups" shorten leader.
Click on image for a larger view.


Just hook the scent dispenser right on to your ball. Then run your release
off the end of the dispenser. This has proven to be a favorite set-up for
Trollers.


Change your scent distribution: To keep your oils and
liquids longer, bore both the chamber and lid holes to 1/8". Soak
a piece of sponge or wad of yarn in your scent, and place in the scent
chamber.
Low cost scent: Try buying tuna or sardines packed
in oil. Drain off the oil and use as your scent.
Glowing effect: First, seal both the hole in the lid
and the hole in the chamber. Next, take a non-toxic glow stick of your
choice, crack it and cut off the top end. Pour the glowing liquid into
your chamber and put the lid on. Bingo, you have a glowing scent dispenser.
Works great with the frost color dispenser. Make sure you have a good
seal so none of the glowing liquid can leak into the water.
Using as a Lure: When going after large fish like
Sturgeon, Tuna and Tarpon, you can use the Berge Tackle Scent Dispenser
as a lure as well. Simply attach a hook to the back eyelet using a chain
swivel, or attach a six inch line strung with red beads and a hook to
the end.
Cleaning: To clean out old scent or residual oils, rinse out dispenser area with water. Then put through one dishwasher cycle. Works like a charm!
Dave Pitts Scent Idea: Last summer, I bought an old blender from a yard sale, and I catch a ton of Anchovies and Sardines. My favorite scent recipe to use is a combination of warmed Vaseline and Anchovies or
Sardines. I heat the Vaseline until it liquefies and place that and the Anchovies in the blender, blend, then pack my dispensers full and freeze them.

Have questions? Drop me,
Wayne a line.
Most of all, have fun while you fish, try out different ideas. We encourage you to send us ideas that have worked for you, as well as pictures of fish you have caught using the Berge Tackle Scent Dispenser.
|